topmounter
May 6, 11:37 AM
It will be fine until it isn't and then you won't have any options other than to replace it.
mrk2010
Dec 27, 11:14 PM
Hey everyone, first post here, and also a Mac noob, so I apologize if this is in the wrong section :)
I am trying to enable file sharing in OS X 10.6 Snow Leopard. I intend to share files on my MacBook with other Windows and Linux computers on my home network. From what I understand, the procedure is as follows:
1) Open up System Preferences and click on Sharing under Internet & Wireless
2) Click on File Sharing on the left, and then add a folder to be shared. After doing this, three Users appear on the right: System Administrator, Administrator, and Everyone (all have read/write access).
3) I want my folder to be password-protected and accessible only to specific users, so I change the permissions for Everyone to No Access. I then add a user (sharing only account) with a specified username and password.
4) I click on Options and select the "Share files and folders using SMB (Windows)", and enable SMB sharing for the user that I created in the previous step. I click on Done, and exit System Preferences.
After performing the above steps, I go to my Linux computer and attempt to connect to the shared folder on my Macbook. I was surprised to be able to access the folder without being prompted for a username and password. The same thing can be seen on my Windows computer.
I went back into Systems Preferences/Sharing on my MacBook, and noticed that the user that I had created has disappeared from the Users list, and all the permissions have been reverted to the default Read & Write Access (including Everyone, which I had changed to No Access earlier). I tried the above procedure again and still ended up with the same result.
Why are the user permissions not being saved? Has anyone here experienced a similar issue?
I am trying to enable file sharing in OS X 10.6 Snow Leopard. I intend to share files on my MacBook with other Windows and Linux computers on my home network. From what I understand, the procedure is as follows:
1) Open up System Preferences and click on Sharing under Internet & Wireless
2) Click on File Sharing on the left, and then add a folder to be shared. After doing this, three Users appear on the right: System Administrator, Administrator, and Everyone (all have read/write access).
3) I want my folder to be password-protected and accessible only to specific users, so I change the permissions for Everyone to No Access. I then add a user (sharing only account) with a specified username and password.
4) I click on Options and select the "Share files and folders using SMB (Windows)", and enable SMB sharing for the user that I created in the previous step. I click on Done, and exit System Preferences.
After performing the above steps, I go to my Linux computer and attempt to connect to the shared folder on my Macbook. I was surprised to be able to access the folder without being prompted for a username and password. The same thing can be seen on my Windows computer.
I went back into Systems Preferences/Sharing on my MacBook, and noticed that the user that I had created has disappeared from the Users list, and all the permissions have been reverted to the default Read & Write Access (including Everyone, which I had changed to No Access earlier). I tried the above procedure again and still ended up with the same result.
Why are the user permissions not being saved? Has anyone here experienced a similar issue?
Tampa Tom
Oct 19, 08:35 PM
...but the line was so long we went to Crazy Buffet to eat sushi and came back at 9. We'll be there for the Big Cat. Hope they're handing out scratch cards with neat prizes.
roadbloc
Apr 7, 02:36 AM
Sony
Apple
Korg
DigiDesign
M-Audio
Suma
Sennheiser
Lynx
Zippo
Apple
Korg
DigiDesign
M-Audio
Suma
Sennheiser
Lynx
Zippo
more...
cocacolakid
Mar 19, 06:13 PM
I have a 2010 unibody mini hooked up to a 37" Vizio 1080p HDTV as it's main monitor. (I also have a 24" HD monitor as a dual monitor, but I rarely use that).
I have had absolutely no issues at all using a large HDTV. There isn't any lag, the picture is fantastic, etc.
I play a ton of movies on this thing, using Front Row, VLC, and Boxee (and the iPad has apps to use as a remote for all 3).
I'd highly recommend it.
I have had absolutely no issues at all using a large HDTV. There isn't any lag, the picture is fantastic, etc.
I play a ton of movies on this thing, using Front Row, VLC, and Boxee (and the iPad has apps to use as a remote for all 3).
I'd highly recommend it.
Patmian212
Sep 26, 12:34 PM
What is a good app for a newbie to create a webpage? I want something simple and easy, free would be a plus. I also have a simple knowledge of html.
more...
lohon
May 5, 06:56 AM
I just purchased the base model 27" last night and had the same query. A friend confirmed that if only using for photo/video editing, 512mb is enough, RAM upgrade is more important which you can do in future.
macingman
Apr 12, 09:16 AM
Just an update. I received my Otterbox Defender in the mail this morning and I love it. I am so confident in the case that when showing it of to a friend, I purposefully slammed it against a marble floor from a 6 feet height and I picked it up and there was not a single scratch on the case.
I have big hands so the naked iPhone 4 is to small for me but the otterbox defender makes the phone just the right size for my hands to fit around, so that is a major plus for me.
I think I'm going to be using this case for a while, probably until I upgrade phones.
I have big hands so the naked iPhone 4 is to small for me but the otterbox defender makes the phone just the right size for my hands to fit around, so that is a major plus for me.
I think I'm going to be using this case for a while, probably until I upgrade phones.
more...
miles01110
Apr 5, 03:41 PM
You probably had a weak password and someone cracked it. Odds are it has nothing to do with Apple's corporate security.
rockinrocker
Apr 25, 11:35 PM
Hmmm... the low lite thing is a little troublesome, as I plan on mostly recording my and the guys I play with on gigs. Sometimes the lighting's not too great.
I wonder if the Zi8 is any better? Similar feature set but without the waterproofing.
They don't really give much specific information about the lens on the Zx3 on the Kodak website...
I wonder if the Zi8 is any better? Similar feature set but without the waterproofing.
They don't really give much specific information about the lens on the Zx3 on the Kodak website...
more...
mnkeybsness
Jul 5, 10:07 PM
partitioning drives is not something i recommend.
i'm kind of wondering...did you buy a brand new computer, or was it used and therefore the drive is not formatted?
i'm kind of wondering...did you buy a brand new computer, or was it used and therefore the drive is not formatted?
iJohnHenry
May 2, 06:24 PM
haha pretty good
Always beware of geeks, bearing gifts. LOL
Always beware of geeks, bearing gifts. LOL
more...
Abstract
Sep 22, 06:56 AM
I am looking for a 19" I think, and I do not have to have widescreen. Also, I think I want to stay away from dell. Just personal problems with some of their stuff in the past at work, and I hate the idea of helping Michael out. :o
Now that is not to say I am saying never on the Dell. What model Viewsonic?
Dell's LCDs are cheaper and better than Apple's anyway. Apple and Dell also both get them from LG (when it comes to Dell's widescreens.....not sure about the rest).
Now that is not to say I am saying never on the Dell. What model Viewsonic?
Dell's LCDs are cheaper and better than Apple's anyway. Apple and Dell also both get them from LG (when it comes to Dell's widescreens.....not sure about the rest).
illitrate23
Jun 19, 04:06 AM
lol - i thought that might be the case, not nearly as interesting as if there'd been a fight though :)
wasn't many people there really - once they let everyone in, i think everyone who was queuing all fit inside the shop.
not sure how it went for contract people, but i got my PAYG one really quickly. left with the phone activated and in my pocket before 08:40 i recon
quite a few cameras and photographers though.
wasn't many people there really - once they let everyone in, i think everyone who was queuing all fit inside the shop.
not sure how it went for contract people, but i got my PAYG one really quickly. left with the phone activated and in my pocket before 08:40 i recon
quite a few cameras and photographers though.
more...
alvindarkness
Apr 8, 11:20 AM
I've heard from AppleInsider that TRIM is long due to the macs and that Apple will enable TRIM support in Lion update...
After I've installed an Intel x25-m G2 SSD onto my 2010 MBP 13", the benchmarks were low compared to that on Windows platform. I also noticed the Apple's own stock SSD (mostly Toshiba or Samsung) have aggressive GC, but their read/write speeds are off compared to many decent SSD's on the market, like sandforce powered OCZ Vertex 3, or intel G3.
Funny thing is that Apple's own solid state drives has their own GC, and enables TRIM on-the-fly, as reported by Anandtech, but I wasn't very sure.
Has anyone have any ideas if and when TRIM will be implemented on macs, since it is really needed for people with SSD's in their macs?
TRIM is already implemented on Lion. You can even enable it on 10.6.7 if you use the IOAHCIFamily.kext from a 2011 MBP.
The trick is that both Lion and 10.6.7 (using the MBP 2011 kext above) look for an SSD with the model name "APPLE SSD". What you need to do is hex edit IOAHCIBlockStorage.kext/Contents/MacOS/IOAHCIBlockStorage and replace the two instances of "APPLE SSD" with the first 9 character of your SSD drive as it appears in system profiler. (In my case "OCZ-VERTE").
Theres a lot more information here -> http://forum.hardmac.com/index.php?showtopic=10020
And heres confirmation that it does indeed work (this is a snow leopard pic, Ive also done this in Lion).
280293
The real question is, wether this is a stop-gap measure, or if Apple intend to continue this trend into the future and only support trim on native apple ssd's. Would be nice to not have to load a hex editor after every delta/combo update.
After I've installed an Intel x25-m G2 SSD onto my 2010 MBP 13", the benchmarks were low compared to that on Windows platform. I also noticed the Apple's own stock SSD (mostly Toshiba or Samsung) have aggressive GC, but their read/write speeds are off compared to many decent SSD's on the market, like sandforce powered OCZ Vertex 3, or intel G3.
Funny thing is that Apple's own solid state drives has their own GC, and enables TRIM on-the-fly, as reported by Anandtech, but I wasn't very sure.
Has anyone have any ideas if and when TRIM will be implemented on macs, since it is really needed for people with SSD's in their macs?
TRIM is already implemented on Lion. You can even enable it on 10.6.7 if you use the IOAHCIFamily.kext from a 2011 MBP.
The trick is that both Lion and 10.6.7 (using the MBP 2011 kext above) look for an SSD with the model name "APPLE SSD". What you need to do is hex edit IOAHCIBlockStorage.kext/Contents/MacOS/IOAHCIBlockStorage and replace the two instances of "APPLE SSD" with the first 9 character of your SSD drive as it appears in system profiler. (In my case "OCZ-VERTE").
Theres a lot more information here -> http://forum.hardmac.com/index.php?showtopic=10020
And heres confirmation that it does indeed work (this is a snow leopard pic, Ive also done this in Lion).
280293
The real question is, wether this is a stop-gap measure, or if Apple intend to continue this trend into the future and only support trim on native apple ssd's. Would be nice to not have to load a hex editor after every delta/combo update.
iPhone1
Mar 20, 12:57 PM
Which buttons?
more...
gnasher729
Apr 24, 10:24 AM
byteSizeOfElement is wrong. Your code will only work (if all other bugs are fixed) with 64 bit code, not with 32 bit code.
Using the result of memcpy is being too smart for your own good.
Using the result of memcpy is being too smart for your own good.
Mr. Anderson
Sep 28, 06:40 PM
Is the server Apache? If so, just pop a .htaccess file in the dir with this in it.
Options All -Indexes
what permissions do I set on that file?
and do I need to put it in every directory? I was hoping for something global.
D
Options All -Indexes
what permissions do I set on that file?
and do I need to put it in every directory? I was hoping for something global.
D
Consultant
Jun 23, 04:07 PM
Can't decide if I want to go to Reston (closer) or Tysons
aarond12
Sep 20, 08:53 PM
That's quite a huge bug. :(
Glad they fixed it, but that kind of thing should have never been allowed to exist in the firstplace.
Why do you think that's such a huge bug? Do you know the account name on my computer? I don't know yours, either. Not only that, you would have to share your computer's files (something you have to do yourself) then open port 548 for the world to see through your router.
-Aaron-
Glad they fixed it, but that kind of thing should have never been allowed to exist in the firstplace.
Why do you think that's such a huge bug? Do you know the account name on my computer? I don't know yours, either. Not only that, you would have to share your computer's files (something you have to do yourself) then open port 548 for the world to see through your router.
-Aaron-
Martyimac
May 3, 04:57 PM
Finally got it at 4:28 PM CDT. Slow D/L speeds but it's back.
Thanks to all that responded.
Thanks to all that responded.
Azurael
Jul 11, 08:59 PM
Apple rodents were better in those days :( Although I'm pretty certain I've used generic PC mice ever since I first had a Mac with a USB port. I never did fit into the single mouse button mindset.
Even if the ball did need cleaning in the hockey puck, at least you could do so easily. Most of the Mighty Mice I meet won't scroll up any more, and I never could get used to having to lift my left finger off the mouse to right click. My dad got fed up and disassembled his to clean it out properly the other day, but I'm sure it'll stop working again within a few weeks. :(
Even if the ball did need cleaning in the hockey puck, at least you could do so easily. Most of the Mighty Mice I meet won't scroll up any more, and I never could get used to having to lift my left finger off the mouse to right click. My dad got fed up and disassembled his to clean it out properly the other day, but I'm sure it'll stop working again within a few weeks. :(
jusacruiser
Apr 27, 12:55 AM
When you took the screenshot, the shot screen loads in a new Preview window. Press CMD+A, then CMD+C to copy it.
Or use the shortcuts listed here (http://guides.macrumors.com/Taking_Screenshots_in_Mac_OS_X).
Ok, thanks.
Or use the shortcuts listed here (http://guides.macrumors.com/Taking_Screenshots_in_Mac_OS_X).
Ok, thanks.
three
Aug 17, 05:19 PM
My friend texted me asking if I wanted an old iMac for free, I obviously said yes. It is a snow 600MHz iMac G3 with 512MB of RAM, 40GB HD, and it works wonderfully. I'm currently looking for my 10.4 disks and going to install Tiger on it. Can't wait.
Tidak ada komentar:
Posting Komentar