yoyo5280
Oct 26, 05:21 AM
I Own It!!!:):):):)
bousozoku
Nov 2, 01:17 AM
Actually, they were all Canon units. Looked great and worked very well in the beginning.
That was my reason for being vague about any specific brand, all multifuntion units leave a lot to be desired in the quality department.
There ain't no free lunch. The only reason that all the manufacturers can offer such seemingly good value for money, is because they cut corners where you can't see - at least not at first anyhow.
That's sad. Canon had a bad reputation for consumer printers when the Bubble Jet line arrived but I thought that they were doing anything to stay away from that.
Well, there is one place where Epson cut corners on the CX6400--the USB 2.0 cable. It's extremely short but better to have the requisite, speedy cable included. Compared to the C84, the CX6400 was expensive--the C86/CX6600 shows a similar price differential. I'm completely surprised that I haven't had troubles as I've read plenty about people with C84s having problems.
I would suggest that paying around $100 for an all-in-one is inviting trouble, though.
That was my reason for being vague about any specific brand, all multifuntion units leave a lot to be desired in the quality department.
There ain't no free lunch. The only reason that all the manufacturers can offer such seemingly good value for money, is because they cut corners where you can't see - at least not at first anyhow.
That's sad. Canon had a bad reputation for consumer printers when the Bubble Jet line arrived but I thought that they were doing anything to stay away from that.
Well, there is one place where Epson cut corners on the CX6400--the USB 2.0 cable. It's extremely short but better to have the requisite, speedy cable included. Compared to the C84, the CX6400 was expensive--the C86/CX6600 shows a similar price differential. I'm completely surprised that I haven't had troubles as I've read plenty about people with C84s having problems.
I would suggest that paying around $100 for an all-in-one is inviting trouble, though.
Daveway
Dec 14, 08:24 PM
Me Want!, Me Want!:)
cbegf
Nov 13, 09:09 PM
Hold down SHIFT, turn it on,
wait till the "Welcome to Macintosh" screen disapears
then it should loadup without the extensions
yeah it never says that all i get on startup is a little icon
wait till the "Welcome to Macintosh" screen disapears
then it should loadup without the extensions
yeah it never says that all i get on startup is a little icon
more...
rdowns
Apr 17, 09:05 AM
This was funny in the first time I saw it.
Dimwhit
Jan 14, 01:54 PM
Anyone know why they don't do like streams anymore? Is it a technology issue, or just the way they prefer it?
more...
mrathee
Jul 27, 11:27 AM
http://www.macrumors.com/images/macrumorsthreadlogo.gif (http://www.macrumors.com/iphone/2010/06/30/mobileme-gallery-updated-for-iphone-4s-retina-display/)
http://images.macrumors.com/article/2010/06/30/104943-mobileme_gallery_1.jpg http://images.macrumors.com/article/2010/06/30/104943-mobileme_gallery_2.jpg
Apple's MobileMe Gallery (http://appshopper.com/photography/mobileme-gallery) application has received a minor update today, fixing a few bugs while delivering new support for iPhone 4. With the update, the application can now download higher-resolution versions of images hosted on MobileMe when used on an iPhone 4 and connecting over Wi-Fi. The change allows users to take advantage of iPhone 4's 960 x 640 "Retina" display to view images in crisper detail.
Unfortunately, the update does not yet bring native iPad compatibility to the application, a feature which would seem to be a logical addition to allow users to browse their MobileMe image galleries on the device's larger screen.
Article Link: 'MobileMe Gallery' Updated for iPhone 4's Retina Display (http://www.macrumors.com/iphone/2010/06/30/mobileme-gallery-updated-for-iphone-4s-retina-display/)
Not going to lie - this may make me actually use that portion of mobile me. It has been dormant in my account for the last year+
http://images.macrumors.com/article/2010/06/30/104943-mobileme_gallery_1.jpg http://images.macrumors.com/article/2010/06/30/104943-mobileme_gallery_2.jpg
Apple's MobileMe Gallery (http://appshopper.com/photography/mobileme-gallery) application has received a minor update today, fixing a few bugs while delivering new support for iPhone 4. With the update, the application can now download higher-resolution versions of images hosted on MobileMe when used on an iPhone 4 and connecting over Wi-Fi. The change allows users to take advantage of iPhone 4's 960 x 640 "Retina" display to view images in crisper detail.
Unfortunately, the update does not yet bring native iPad compatibility to the application, a feature which would seem to be a logical addition to allow users to browse their MobileMe image galleries on the device's larger screen.
Article Link: 'MobileMe Gallery' Updated for iPhone 4's Retina Display (http://www.macrumors.com/iphone/2010/06/30/mobileme-gallery-updated-for-iphone-4s-retina-display/)
Not going to lie - this may make me actually use that portion of mobile me. It has been dormant in my account for the last year+
Cabbit
Feb 12, 03:21 PM
I tried a few of the CMS systems and found them not to fit my needs so i run my own CMS built on Zend Framework for my clients.
more...
AWishForNoOne
Feb 8, 06:48 PM
mx1000 talked about in some detail on these threads::
http://forums.macrumors.com/showthread.php?t=108361&highlight=mx1000
http://forums.macrumors.com/showthread.php?t=108361&highlight=mx1000
http://forums.macrumors.com/showthread.php?t=108361&highlight=mx1000
http://forums.macrumors.com/showthread.php?t=108361&highlight=mx1000
dgitalchaos
May 6, 12:06 AM
If you're good with your hands and taking things apart, then this will be a VERY easy task. I didn't have problems with heating, as my 15 MacBook Pro shipped with 10.6.7 (heating issues resolved?), but my curiosity got the best of me so I took mine apart... the thermal paste was horrible. I cleaned up the old thermal paste and had my GPU and CPU shining before I applied the OCZ Freeze, which dropped my already cool temperatures even more.
Normal temps are now 110 Fahrenheit (42 Celsius).
I used an acid brush with some rubbing alcohol to make sure that I didn't break the resistors on the GPU.
If you decide to take on the task, good luck AND make sure to disconnect the battery.
Normal temps are now 110 Fahrenheit (42 Celsius).
I used an acid brush with some rubbing alcohol to make sure that I didn't break the resistors on the GPU.
If you decide to take on the task, good luck AND make sure to disconnect the battery.
more...
stellardream
May 4, 02:41 PM
There's no special TP --> HDMI, because there's no need for one. You can plug in Mini DP into TP and it will work. In fact the port has separate channel for video, so your monitor doesn't compete for bandwidth with anything else.
chown33
Apr 18, 05:57 PM
Hi im getting this error,UIApplication may not respond to '+mainWindow' with my action sheet , but im not really sure why. any help would be greatly appreciated.
How to solve problems like this:
1. Open the class reference doc (UIApplication in this case).
2. Search for the expected method or property (mainWindow in this case).
3. If found, read the description carefully (some detail may differ from your expectation, such as - instead of +, or a different letter-case than you expected).
4. If not found, open the class reference doc for the superclass and go to step 2.
5. If not found in any class or superclass, then the reason for the message is simple: the class does not have the method or property you expected.
If you reach step #5, you'll have to modify your problem-solving procedure. You think it is method xyzzy, but it really might have method xyz, or zzy.
In your case, it's not clear what you're trying to do. You might mean the keyWindow property of the UIApplication instance, but if not, you'll have to explain exactly what you're trying to accomplish.
In general, it's always a good idea to describe exactly what you're trying to accomplish.
How to solve problems like this:
1. Open the class reference doc (UIApplication in this case).
2. Search for the expected method or property (mainWindow in this case).
3. If found, read the description carefully (some detail may differ from your expectation, such as - instead of +, or a different letter-case than you expected).
4. If not found, open the class reference doc for the superclass and go to step 2.
5. If not found in any class or superclass, then the reason for the message is simple: the class does not have the method or property you expected.
If you reach step #5, you'll have to modify your problem-solving procedure. You think it is method xyzzy, but it really might have method xyz, or zzy.
In your case, it's not clear what you're trying to do. You might mean the keyWindow property of the UIApplication instance, but if not, you'll have to explain exactly what you're trying to accomplish.
In general, it's always a good idea to describe exactly what you're trying to accomplish.
more...
kirbyman100
Mar 19, 09:57 PM
Wait... also, what ARE WU's?
garybUK
Feb 16, 08:56 AM
What frequency range will the xion usb turntable sample at? 44khz, try and go for 96khz to get a better de-clicking and de-popping result (though there's some debate about this). Vinyl has better results when recording at 24bit also.
The file format is kind of mute, but I always record mine in WAV to keep a master copy, then convert later using DBPowerAmp tools (on windows).
Plus Wav is supported in iTunes so you can convert using their dubious converters within iTunes itself.
Edit: I also use Audacity as it enables you to do a lot more filters without damaging the original copy.
The file format is kind of mute, but I always record mine in WAV to keep a master copy, then convert later using DBPowerAmp tools (on windows).
Plus Wav is supported in iTunes so you can convert using their dubious converters within iTunes itself.
Edit: I also use Audacity as it enables you to do a lot more filters without damaging the original copy.
more...
Nipsy
Sep 21, 01:22 AM
Friday nights are the standard maintenance period for the Apple store.
You should get excited when you see that graphic, and it is not a Friday night.
You should get excited when you see that graphic, and it is not a Friday night.
dmr727
Aug 24, 07:39 PM
Dunno how rare it is, but it's definitely pimp! Nice! :)
more...
macmike47
Jan 14, 01:27 PM
Yeah, great, still won't be able to discipline myself to wait for it though :(
The Highlander
Feb 20, 05:50 PM
Well... it WILL set a precedent and you will see apple going after jailbreakers... And they have MORE muscle than SONY.
Now.. on the other side...
If Geohot wants a donation... Jailbreak 4.3 untethered and you will get a handsome donation from me.
Now.. on the other side...
If Geohot wants a donation... Jailbreak 4.3 untethered and you will get a handsome donation from me.
atheistpally
Feb 22, 12:13 AM
Is it 250 or 500? I'm close to 250...
Night Spring
Mar 14, 12:13 PM
As mentioned on previous post, you need to have your SHSHs saved if you want to installed anything else than the current firmware released by Apple, (currently 4.3). The windows where Apple was signing those SHSHs for 4.2.1 have already been closed (so unless somehow you got your SHSHs saved by tiny Umbrella or Cydia before) your only option is to upgrade to 4.3 or wait out for a Jailbreak tool.
Jailbreak tools don't help restore to earlier firmware. It's more the other way around -- people save SHSHs in case a jailbreak method requires a downgrade to earlier firmware. If you didn't save the SHSH, there's no way to downgrade, now or ever.
Jailbreak tools don't help restore to earlier firmware. It's more the other way around -- people save SHSHs in case a jailbreak method requires a downgrade to earlier firmware. If you didn't save the SHSH, there's no way to downgrade, now or ever.
Austin M.
Apr 6, 03:31 PM
Looks like it's dual injected with silicone.
wdlove
Sep 7, 01:33 PM
Lance must be missing the spotlight and accolades already. Just another Cher. Hope if he returns that he will remain clean.
hotsnuglemonstr
Jun 23, 09:28 AM
I think I'll be there... no so bright but quite early.
mddharma
Sep 20, 07:21 PM
:mad: The 17" apple studio displays I saw on line - ARE NOT AVAilable. Not at the price they were quoting. So now I have more thinking to do. There are 2 companies that claim they have them in stock but want close to $650!
I have seen quite a few on ebay in the 250 - 300 range. What do you all think of buying a monitor on ebay?
I have seen quite a few on ebay in the 250 - 300 range. What do you all think of buying a monitor on ebay?
Tidak ada komentar:
Posting Komentar