johnfkitchen
May 5, 12:04 PM
This has been very helpful to me, thanks! My iMac will arrive in June, but I'm trying to get ready for fast-tracking the migration.
In my case, I plan to have most of my data files on the 2TB hard drive, but some data files on the SSD. For example, my Aperture library (which will reference most of the images) will likely benefit from the speed, so will be on the SSD.
So where should I be putting my Home Folder? And how will the home folder know about subfolders being on a different drive? Do I set up aliases? I have not used aliases, but I'm happy to do what it takes! :)
Thanks.
In my case, I plan to have most of my data files on the 2TB hard drive, but some data files on the SSD. For example, my Aperture library (which will reference most of the images) will likely benefit from the speed, so will be on the SSD.
So where should I be putting my Home Folder? And how will the home folder know about subfolders being on a different drive? Do I set up aliases? I have not used aliases, but I'm happy to do what it takes! :)
Thanks.
Brother tn350
May 4, 02:36 AM
The fact, that you were deceived the first time, you should no longer engage in any transaction with the man because it will be possible that in the end, you will be losing more.:(
east1999
May 3, 10:14 AM
Hey everyone,
I read most threads in this forum about overheating, but it turned out that's not at all a concern in a daily basis. What is a concern, however, is the instant fan noise whenever the laptop gets under load.
It is constant when running games (always at 6000 rpm). I've tried Call of Duty IV, and Starcraft II. Also Crysis II via Boot Camp.
It may happen under Facetime.
It may happen if you leave a flash animation running in a tab.
it may happen with AirVideo Server (serving to an iPod).
Turns out there's really no middle ground for this fan. It is either audible, or isn't. With 2000 rpm you know it's there, but frankly that's barely a concern. Sometimes it turns on suddenly and goes to maximum speed in seconds, stays there for a minute or two, then drops down.
So I guess that ANY heavy load will come with fan noise. Here's what I need to ask then.
- Is this a given for Sandy Bridge?
- Do you have this kind of noise in your C2D MacBooks (Air included)?
- Is it better when you have more fans involved (larger MBP's, iMacs..)?
Like I said, it hasn't been that much a concern for most uses, because they stay under the radar. The MBP gets hot but that's not even a problem. What I get is there is a clear threshold between what you can do (silently) and what produces noise. I stopped playing games because I really cannot do with that much noise. Turns out the GPU can roll with a lot of games, but I thought the noise wasn't included. Plus I'm afraid I'll damage the laptop if the fan is on for so long.
I'm thinking I'd rather have lower processing power and silent operation. I can take a longer iPhoto import if I don't hear this fan. Help?
I read most threads in this forum about overheating, but it turned out that's not at all a concern in a daily basis. What is a concern, however, is the instant fan noise whenever the laptop gets under load.
It is constant when running games (always at 6000 rpm). I've tried Call of Duty IV, and Starcraft II. Also Crysis II via Boot Camp.
It may happen under Facetime.
It may happen if you leave a flash animation running in a tab.
it may happen with AirVideo Server (serving to an iPod).
Turns out there's really no middle ground for this fan. It is either audible, or isn't. With 2000 rpm you know it's there, but frankly that's barely a concern. Sometimes it turns on suddenly and goes to maximum speed in seconds, stays there for a minute or two, then drops down.
So I guess that ANY heavy load will come with fan noise. Here's what I need to ask then.
- Is this a given for Sandy Bridge?
- Do you have this kind of noise in your C2D MacBooks (Air included)?
- Is it better when you have more fans involved (larger MBP's, iMacs..)?
Like I said, it hasn't been that much a concern for most uses, because they stay under the radar. The MBP gets hot but that's not even a problem. What I get is there is a clear threshold between what you can do (silently) and what produces noise. I stopped playing games because I really cannot do with that much noise. Turns out the GPU can roll with a lot of games, but I thought the noise wasn't included. Plus I'm afraid I'll damage the laptop if the fan is on for so long.
I'm thinking I'd rather have lower processing power and silent operation. I can take a longer iPhoto import if I don't hear this fan. Help?
tkermit
Sep 14, 07:19 PM
Ok I was down by are pond and I caught this strange thing and put it in a bucket.
more...
Plastic ponytail holders
Vintage 50#39;s Soft Plastic Bun
more...
Ponytail Holders. $8.99
LILAC PLASTIC PONYTAIL HOLDER EA1405 | eBay UK
more...
Wholesale White Heart Plastic Ponytail Holder
Wholesale White Heart Plastic Ponytail Holder
more...
hair ponytail holder,
and retail TPU plastic ponytail holder,telephone coil hairbandUSD 0.07/Piece,100 Items Per Lot Wholesale Price at DHgate.com
more...
Plastic Belt
and Fun Ponytail Holders :
more...
These ponytail holders in Love
Peace Ponytail Holders 4ct
more...
Cube Hair Pony Holder
hair ponytail holder,
HELLO KITTY FACE PLASTIC PONYTAIL HOLDER/ BAND | eBay UK
more...
alvindarkness
Apr 8, 12:04 PM
TRIM enabler is a hack, and some people have reported that their read/write speeds have dropped significantly after installing it on their macs. I'm worried that it even does the job, but I am guessing it just changes the kernel so that instead of saying 'No' it says 'Yes' under TRIM support in SERIAL-ATA.
It's not just changing the No to a Yes. You can confirm TRIM is working by using hfsdebug and dd, with and without the patch. The beachballs people get could be due to an over aggressive use of TRIM by the current kext's, guess we'll find out sooner or later.
It's not just changing the No to a Yes. You can confirm TRIM is working by using hfsdebug and dd, with and without the patch. The beachballs people get could be due to an over aggressive use of TRIM by the current kext's, guess we'll find out sooner or later.
mtbdudex
Nov 3, 11:28 AM
can Aperture 3 directly create albums and/or add photos?
more...
bluap84
Feb 24, 09:41 AM
right i need a nap now...you have turned my brain to mush! haha.
i think i understand, im so use to stuff like drag a drop. NOOB! lol
i think i understand, im so use to stuff like drag a drop. NOOB! lol
maflynn
Feb 2, 09:53 AM
Yeh but ...... "every other sandy bridge computer is a 'PC' and Dell/HP appear to have more stock (sandy bridge) or in the process of ramping up production, when the news broke.
Yep and they'll have to right off that stock and/or get intel to cover the cost. The point is that this affects every computer maker. I'd not really single out one or two makers. What about Lenovo, they have sandy bridge computers, or Acer, Asus, or Gateway?
Yep and they'll have to right off that stock and/or get intel to cover the cost. The point is that this affects every computer maker. I'd not really single out one or two makers. What about Lenovo, they have sandy bridge computers, or Acer, Asus, or Gateway?
more...
kuwisdelu
Apr 13, 06:22 PM
That's not an error, just a warning or message telling you the following: in one of the default R packages called "datasets" there is also a variable called "sleep," and since you're using attach() on a different variable also called sleep, you won't be able to access the sleep variable in the "datasets" package in the same way anymore. When you ask for "sleep," R will use your version.
If you're familiar with namespaces or global variables vs. local variables in any other programming language, it's similar to that. If not, basically, it's telling you there are two things called "sleep," and since you've told R to use yours, the other one is now hidden or "masked."
I'd suggest not using the attach() function, and just accessing variables through the $ operator. Do fp1c$sleep instead, or use data=fp1c if you're using it in a function like lm() or something.
If you're familiar with namespaces or global variables vs. local variables in any other programming language, it's similar to that. If not, basically, it's telling you there are two things called "sleep," and since you've told R to use yours, the other one is now hidden or "masked."
I'd suggest not using the attach() function, and just accessing variables through the $ operator. Do fp1c$sleep instead, or use data=fp1c if you're using it in a function like lm() or something.
mkrishnan
Dec 23, 09:57 PM
This is a total wild shot, but you're sharing your iTunes library over the network, right? It appears to be trying to make domain name accommodations for your iTunes library. I'm not sure if that's standard operating procedure or not, but it seems strange to me. Try turning that off temporarily and seeing if you get the same keyboard lock?
If you don't, then perhaps it has something to do with the way iTunes sharing is set up... if not, it was a wild goose chase. Sorry. :(
Oh, and at this point, if you haven't already, do just repair permissions for the heck of it. You never know.
If you don't, then perhaps it has something to do with the way iTunes sharing is set up... if not, it was a wild goose chase. Sorry. :(
Oh, and at this point, if you haven't already, do just repair permissions for the heck of it. You never know.
more...
cfairbank
Mar 11, 10:44 PM
Ended up getting what I wanted, 32gb black wifi. Was around 35 to 40 in line. Once the doors opened I was in and out by 5:30. Granted I could have gone to best buy or target to get but I actually like buying at apple store. Guess it's the experience and the people.
Cify
Apr 13, 02:09 PM
splashstop really is the best! I just wish right mouse wasn't tap and hold :(
more...
Kebabselector
Sep 25, 07:04 PM
It's like Speed: 2. Props to the rail system for averting disaster though.
Pity UB40 weren't on this runaway train - might have done us all a favour.
Pity UB40 weren't on this runaway train - might have done us all a favour.
Chone
Mar 27, 09:00 PM
Doesn�t this thread belong to 2000 or something?
10GB iPods? N64 expansion paks? Heh, doesn�t look like a new post thats for sure.
As for your question it improves the image quality somewhat but some games (like Majora�s Mask) require it so its not a bad purchase... as for getting one, try ebay...
10GB iPods? N64 expansion paks? Heh, doesn�t look like a new post thats for sure.
As for your question it improves the image quality somewhat but some games (like Majora�s Mask) require it so its not a bad purchase... as for getting one, try ebay...
more...
dobbin
Oct 17, 04:32 AM
This is indeed a well known issue with cubes. Some people were affected immediately, and others only after a period of time like you.
My cube has a 'seizure' about once every 4 months and it will do this for an hour or two and then correct itself and be fine again.
There have been numerous causes and solutions suggested and it appears that different things work for different machines.
The usual cause is the proximity switch - the touch sensitive one on top of the cube. Most people report that the switching on and off is caused by a badly fitting or loose gasket around this switch inside the cube.
Some people say that making sure this gasket is seated firmly will cure the problem, and others have had this replaced (for free) by Apple.
I have never found this to be the case with mine, it just seems to have a mind of its own, for short spells every now and again.
Some people have also reported that this happens on hot days or when the air-con is swithed off. I've not noticed this (as I live in the UK it never gets hot!).
There have been hundreds of discussions on this topic since the cube was introduced and you can probably find some useful info on the web.
I'm not sure why Apple have not provided more help on this topic given what a widespread issue it was/is, but I just searched Google for "Apple Cube Switch problem" and it came back with a lot of links. Bear in mind that the solution for one cube may not help yours! I guess this is the price we have to pay for having the coolest computer the world has ever seen :D
Cheers,
Dobbin
My cube has a 'seizure' about once every 4 months and it will do this for an hour or two and then correct itself and be fine again.
There have been numerous causes and solutions suggested and it appears that different things work for different machines.
The usual cause is the proximity switch - the touch sensitive one on top of the cube. Most people report that the switching on and off is caused by a badly fitting or loose gasket around this switch inside the cube.
Some people say that making sure this gasket is seated firmly will cure the problem, and others have had this replaced (for free) by Apple.
I have never found this to be the case with mine, it just seems to have a mind of its own, for short spells every now and again.
Some people have also reported that this happens on hot days or when the air-con is swithed off. I've not noticed this (as I live in the UK it never gets hot!).
There have been hundreds of discussions on this topic since the cube was introduced and you can probably find some useful info on the web.
I'm not sure why Apple have not provided more help on this topic given what a widespread issue it was/is, but I just searched Google for "Apple Cube Switch problem" and it came back with a lot of links. Bear in mind that the solution for one cube may not help yours! I guess this is the price we have to pay for having the coolest computer the world has ever seen :D
Cheers,
Dobbin
FutureBlake
May 1, 07:53 AM
That's what I was afraid of... :( Everything's good as far as Win reports. Device Manager is clearn. I'm sure the 11 and the 13 have same audio drivers - just can't figure out why it worked for the first few reboots, but discovered the problem after all updates and service packs were installed.
For the reinstall process, should I kill the current Win partition and really start from scratch? Or just reinstall from the 'advanced recovery method' menu?
For the reinstall process, should I kill the current Win partition and really start from scratch? Or just reinstall from the 'advanced recovery method' menu?
more...
miles01110
Apr 24, 07:12 PM
A quick search for "VPN OS X" should yield multiple results.
Blues003
Apr 25, 06:23 AM
I was actually thinking of waiting until I could get 8GB and SandyBridge (iX) processors. ;) But the fact they'll have to be ULV will still make their performance lower than the MBPs.
nomade
Mar 11, 09:54 AM
For those looking for the same solution here what I found:
<?php
$sql_rotation=mysql_query('SELECT * FROM photo_atelier');
$i=1;
while($ligne_rotation=mysql_fetch_array($sql_rotation)){
$array[$i]="../media/atelier/grand/".$ligne_rotation['photo']."";
$i++;
}
?>
<SCRIPT LANGUAGE="JavaScript">
var timeDelay = 3; // change delay time in seconds
var Pix = new Array
(
<?php
echo "'".$array[1]."',";
echo "'".$array[2]."',";
echo "'".$array[3]."',";
echo "'".$array[4]."',";
echo "'".$array[5]."'";
?>
);
var howMany = Pix.length;
timeDelay *= 1000;
var PicCurrentNum = 0;
var PicCurrent = new Image();
PicCurrent.src = Pix[PicCurrentNum];
function startPix() {
setInterval("slideshow()", timeDelay);
}
function slideshow() {
PicCurrentNum++;
if (PicCurrentNum == howMany) {
PicCurrentNum = 0;
}
PicCurrent.src = Pix[PicCurrentNum];
document["ChangingPix"].src = PicCurrent.src;
}
// End -->
</script>
<body OnLoad="startPix()">
<?php echo "<img name=ChangingPix src=".$array[1].">"; ?>
to see the result go to http://zoomaventurephoto.com/fr/atelier.php:D
<?php
$sql_rotation=mysql_query('SELECT * FROM photo_atelier');
$i=1;
while($ligne_rotation=mysql_fetch_array($sql_rotation)){
$array[$i]="../media/atelier/grand/".$ligne_rotation['photo']."";
$i++;
}
?>
<SCRIPT LANGUAGE="JavaScript">
var timeDelay = 3; // change delay time in seconds
var Pix = new Array
(
<?php
echo "'".$array[1]."',";
echo "'".$array[2]."',";
echo "'".$array[3]."',";
echo "'".$array[4]."',";
echo "'".$array[5]."'";
?>
);
var howMany = Pix.length;
timeDelay *= 1000;
var PicCurrentNum = 0;
var PicCurrent = new Image();
PicCurrent.src = Pix[PicCurrentNum];
function startPix() {
setInterval("slideshow()", timeDelay);
}
function slideshow() {
PicCurrentNum++;
if (PicCurrentNum == howMany) {
PicCurrentNum = 0;
}
PicCurrent.src = Pix[PicCurrentNum];
document["ChangingPix"].src = PicCurrent.src;
}
// End -->
</script>
<body OnLoad="startPix()">
<?php echo "<img name=ChangingPix src=".$array[1].">"; ?>
to see the result go to http://zoomaventurephoto.com/fr/atelier.php:D
Nereus
Dec 16, 05:43 PM
Perhaps you should try removing the file com.apple.airport.preferences.plist from the folder you find it in. Perhaps some of the preferences are corrupt.
Also, I'd check to make sure the antenna is plugged in correctly. :)
Thanks! How do I check that the antenna is plugged in correctly?
Also, I'd check to make sure the antenna is plugged in correctly. :)
Thanks! How do I check that the antenna is plugged in correctly?
grabberslasher
Nov 14, 05:18 AM
Just in case anybody is interested...
I made a simple CoreImage test app to try and get to grips with CoreImage. It's not very advanced but it can do a number of effects and is fun to play with.
I need somebody to host it for the moment because I'm away from my webserver so if anybody can do that then it will be available for download.
Requires a CoreImage compatible graphics card that is Quartz2DExtreme capable. Works nice and smoothly on my 17" Powerbook (Most recent gen).
http://img119.exs.cx/img119/1324/ci.jpg
I made a simple CoreImage test app to try and get to grips with CoreImage. It's not very advanced but it can do a number of effects and is fun to play with.
I need somebody to host it for the moment because I'm away from my webserver so if anybody can do that then it will be available for download.
Requires a CoreImage compatible graphics card that is Quartz2DExtreme capable. Works nice and smoothly on my 17" Powerbook (Most recent gen).
http://img119.exs.cx/img119/1324/ci.jpg
Lacero
Jan 24, 07:38 PM
Happens to me as well. Sometimes my airport internet cuts out completely for no apparent reason with my linksys wireless router. WRTG54 I believe is the model.
heylookitskarl
Feb 22, 07:45 AM
If the position you were applying for was full-time that could be a HUGE factor. Because how many high-school students can work from 3pm - 12am and then be able to go back to work at 10am. If it was part time maybe they felt some other applicants had a stronger resume or they may have felt they want someone with more experience. You never truly no unless you ask a manager who interviewed you.
Yea I never thought about the hours but just about every store closes around 10:00 and I was able to work from 4:00-9:00 after school. It was not an interview but a seminar (but I guess your right).... Does anyone know how to get my application seen by the store manager?? I talked to the store manager in the Garden State Plaza NJ and she said that the corporate office in CA took care of all the applications and she will never see the application until it gets screened through.
Does anyone know someone who knows someone?? =P
Yea I never thought about the hours but just about every store closes around 10:00 and I was able to work from 4:00-9:00 after school. It was not an interview but a seminar (but I guess your right).... Does anyone know how to get my application seen by the store manager?? I talked to the store manager in the Garden State Plaza NJ and she said that the corporate office in CA took care of all the applications and she will never see the application until it gets screened through.
Does anyone know someone who knows someone?? =P
Apple OC
Apr 30, 10:51 PM
as a rule ... if you are unsure ... do not delete them
Tidak ada komentar:
Posting Komentar