permfiling
10-28 01:23 PM
Nope did not getthe I-797 yet, just an e-mail from USCIS. This was at NSC
Did you get your physical green card? Have you completed your FP?
I got the I-797 approval notice in mail but no card yet. I heard CARD takes few weeks.
Did you get your physical green card? Have you completed your FP?
I got the I-797 approval notice in mail but no card yet. I heard CARD takes few weeks.
snathan
04-24 08:17 AM
My lawyer just informed me that I received an RFE on my wife's 485
USCIS is asking for "Memorandum of marriage"
Is it the same as Marriage certificate. I have already send the marriage certificate which states that the marriage has been registered under Hindu marriage registration rules. My name as well as my wifes name and date of amrriage is there.
Why do they need this additional proof Not sure. Has anyone faced this RFE?
Looks like some crazy guys are working in USCIS hell bent on harassing legal immigrants.
I have been given just four weeks to respond.
I never heard of this...what crap it is.?:eek:
USCIS is asking for "Memorandum of marriage"
Is it the same as Marriage certificate. I have already send the marriage certificate which states that the marriage has been registered under Hindu marriage registration rules. My name as well as my wifes name and date of amrriage is there.
Why do they need this additional proof Not sure. Has anyone faced this RFE?
Looks like some crazy guys are working in USCIS hell bent on harassing legal immigrants.
I have been given just four weeks to respond.
I never heard of this...what crap it is.?:eek:
rock581
07-18 05:32 AM
Thank you all for replying.
Well I will surely consult the attorney but they will be too busy now to answer some trivial questions. My attorney doesn't respond soon enough and I might have to take some decisions soon in the next couple of days.
My spouse got his visa stamped. So he is all ready. I was thinking if my spouse could come on Aug 10th get the formalities done and leave for Canada on Aug 14th and come back after cumulative 365 +4 days are over on Aug 22nd then shouldn't it work? I am guessing he should be eligible to get his H1 next year .
Well I will surely consult the attorney but they will be too busy now to answer some trivial questions. My attorney doesn't respond soon enough and I might have to take some decisions soon in the next couple of days.
My spouse got his visa stamped. So he is all ready. I was thinking if my spouse could come on Aug 10th get the formalities done and leave for Canada on Aug 14th and come back after cumulative 365 +4 days are over on Aug 22nd then shouldn't it work? I am guessing he should be eligible to get his H1 next year .
mbartosik
08-03 03:55 PM
see \/\/\/
more...
chadoubra
06-21 12:41 PM
my h1b expires in october 2008. my passport expires in july 2007 and at the POE (Dallas), i received an I-94 till July 10th 2007.
i now have a new passport and went to the dallas/fort worth airport CBP to get the date corrected to october 2008. i took my I-797 with me and showed it to them. they said i have to file an I-539 with USCIS. several people managed to get the same situation remedied at a CBP. has anyone had success at another texas CBP? please help!
i now have a new passport and went to the dallas/fort worth airport CBP to get the date corrected to october 2008. i took my I-797 with me and showed it to them. they said i have to file an I-539 with USCIS. several people managed to get the same situation remedied at a CBP. has anyone had success at another texas CBP? please help!
vactorboy29
05-14 04:59 PM
Vactor,
Thanks, So what was your job requirement? Was that Bachelors?
Can you tell me that which education evaluator you use for that? I might can refer my lawyer to him.
I had my diploma in Mechanical engineering (3 - Years) and B.E. in mechanical engineering. My job requirements were Bachelor's Degree plus five years experience. I don�t remember evaluations agency name now but I will get that for you tomorrow.
Thanks, So what was your job requirement? Was that Bachelors?
Can you tell me that which education evaluator you use for that? I might can refer my lawyer to him.
I had my diploma in Mechanical engineering (3 - Years) and B.E. in mechanical engineering. My job requirements were Bachelor's Degree plus five years experience. I don�t remember evaluations agency name now but I will get that for you tomorrow.
more...
sam_austin77
12-11 12:30 AM
L1A visa, validity May 2008
EB 1 category
I-140 receipt date July 27, 2007 & I-485 receipt date July 27, 2007.
When and how can I excercise AC 21 portability
Do I need an EAD for this
EB 1 category
I-140 receipt date July 27, 2007 & I-485 receipt date July 27, 2007.
When and how can I excercise AC 21 portability
Do I need an EAD for this
visves
12-20 12:03 PM
I believe the AP needs to be approved before the person leaves the country for it to be used while coming back. This needs to be clarified though.
From your post, it sounds like she doesn't have an H4 stamp on her passport, but only the approval notice. She can't re-enter the US only by showing the approval notice at the port of entry. She needs to have the stamp on her passport as you already may be aware of.
Sending AP (or any other immigration document in original) outside of the US (e.g., to India) via courier/mail is risky, if not forbidden by law.
GG_007
PS: Not a lawyer, just my personal opinion.
From your post, it sounds like she doesn't have an H4 stamp on her passport, but only the approval notice. She can't re-enter the US only by showing the approval notice at the port of entry. She needs to have the stamp on her passport as you already may be aware of.
Sending AP (or any other immigration document in original) outside of the US (e.g., to India) via courier/mail is risky, if not forbidden by law.
GG_007
PS: Not a lawyer, just my personal opinion.
more...
dhirajs98
08-18 02:18 PM
sorry to break the bad news to you,but this usually means a denial. My I 140 was approved recently, the online status cleared said it's approved. I read many posts on this forum who had the same online status as yours and their I 140's were denied.
Are you sure it would a straight denial or they can ask for more evidence? And if it is a denial then what are my options? I have another I140+I485 filed with my EB3 labor. Is it possible that denial of EB2 I-140 would affect my EB3 I-140 processing. I remeber that my attorney used my EB2-!-140 receipt when filed Eb3 I-140+I-485.
Are you sure it would a straight denial or they can ask for more evidence? And if it is a denial then what are my options? I have another I140+I485 filed with my EB3 labor. Is it possible that denial of EB2 I-140 would affect my EB3 I-140 processing. I remeber that my attorney used my EB2-!-140 receipt when filed Eb3 I-140+I-485.
bsbawa10
08-15 09:56 AM
Why are there two "Priority Date" columns?
There is onlly one. The other ones are for the notice date and receipt dates
There is onlly one. The other ones are for the notice date and receipt dates
more...
paskal
02-14 03:44 PM
Physicians measures:
We have been actively engaged in discussions with senate leaders on physician issue over the last few months. Members of our chapter traveled to DC to attend a key Senate task force meeting on physician immigration and current challenges. We also attended the AAPI legislative day event in DC and found support from lawmakers and from AAPI.
We strongly encourage everyone to be strongly behind the administrative fixes campaign, as this will bring considerable relief while we battle for immigration reform. letters from physicians and their colleagues will carry their own weight. Ask your employers too and approach your lawmakers!
Our efforts have shown signs of bearing fruit in recent times. Recently we were privileged to be part of a discussion on an upcoming physician bill that would satisfy our primary agenda: quota free green cards for physicians that serve in under served areas. The current proposal would encompass both J1 and H1B physicians. This would be an interim step towards reform- a more wide ranging bill is expected in the future.
We are hoping that this bill can be brought up for voting at some point in the near future. We will need help from many physician members to achieve our objective. A successful result would resolve the entire issue for many physicians AND would establish for the first time a principal that IV has espoused: skilled immigrants that work in the national interest should not be bound by quotas. This precedent would go along way in resolving the larger immigration morass as well.
The chapter thanks all it's active members and IV for the efforts and support that have led us this far. If you want to join the physicians chapter, use the links in my signature. Remember that membership is contingent upon disclosing at least your name and contact number, which is kept confidential at all times.
We have been actively engaged in discussions with senate leaders on physician issue over the last few months. Members of our chapter traveled to DC to attend a key Senate task force meeting on physician immigration and current challenges. We also attended the AAPI legislative day event in DC and found support from lawmakers and from AAPI.
We strongly encourage everyone to be strongly behind the administrative fixes campaign, as this will bring considerable relief while we battle for immigration reform. letters from physicians and their colleagues will carry their own weight. Ask your employers too and approach your lawmakers!
Our efforts have shown signs of bearing fruit in recent times. Recently we were privileged to be part of a discussion on an upcoming physician bill that would satisfy our primary agenda: quota free green cards for physicians that serve in under served areas. The current proposal would encompass both J1 and H1B physicians. This would be an interim step towards reform- a more wide ranging bill is expected in the future.
We are hoping that this bill can be brought up for voting at some point in the near future. We will need help from many physician members to achieve our objective. A successful result would resolve the entire issue for many physicians AND would establish for the first time a principal that IV has espoused: skilled immigrants that work in the national interest should not be bound by quotas. This precedent would go along way in resolving the larger immigration morass as well.
The chapter thanks all it's active members and IV for the efforts and support that have led us this far. If you want to join the physicians chapter, use the links in my signature. Remember that membership is contingent upon disclosing at least your name and contact number, which is kept confidential at all times.
HumHongeKamiyab
04-08 10:59 PM
Then what do you do if you dont have a candian permit ??
Hope the following link will make it clear.. Probably, You have to go back to your home country for stamping if your visa is rejected in canada..
http://travel.state.gov/visa/laws/telegrams/telegrams_1441.html
--HumHongeKamiyab
Hope the following link will make it clear.. Probably, You have to go back to your home country for stamping if your visa is rejected in canada..
http://travel.state.gov/visa/laws/telegrams/telegrams_1441.html
--HumHongeKamiyab
more...
dreamgc_real
06-18 09:52 AM
how does the eb3 to eb2 interfiling work?
Charleh
05-28 05:14 AM
You can bind them quite easily, assuming your data sources implement the correct interfaces (I believe IBindable/IBindableList).
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
more...
lecter
August 2nd, 2005, 11:43 PM
Mats is on the money for sure. A 350D or a D70s (or D50) with a kit lens will make your millenia.
I bought a 20D as a backup, knock about camera for Africa. It's a good wee beast. But not in your budget range. But it's the obvious next step.
We can hardly wait for the ** which is ##MP and ##fps.
hehe
Rob
I bought a 20D as a backup, knock about camera for Africa. It's a good wee beast. But not in your budget range. But it's the obvious next step.
We can hardly wait for the ** which is ##MP and ##fps.
hehe
Rob
mikemeyers
11-07 04:00 PM
Can anyone else have opinion on this?
more...
WaitingYaar
01-18 08:44 PM
I was under the impression the target is all cases to be cleared within 6 months.
Administrator2
03-23 03:51 PM
Business week MBA forums had a big conversation about this topic with some MBA graduates saying they ere affected. May be someone can post this on there.
Thanks, could you please post the link to that forum.
We found out that following members may have been affected by TARP funding bill:
bazuka6
rs_123
determined_indian
goel_ar
jaspreetsinghgandhi
mthoota
pxkuma
Does anyone know these members?
Thanks, could you please post the link to that forum.
We found out that following members may have been affected by TARP funding bill:
bazuka6
rs_123
determined_indian
goel_ar
jaspreetsinghgandhi
mthoota
pxkuma
Does anyone know these members?
isthereawayout
02-22 01:47 PM
snathan - How different is different enough for USCIS/DOL to be okay with it? Would the num of years of experience be helpful if it was different.
I guess I am trying to figure out if I should let go of this position and wait for another one to come around if it's the current one is not worth pursuing due to potential issues during I140 stage.
Thanks
I guess I am trying to figure out if I should let go of this position and wait for another one to come around if it's the current one is not worth pursuing due to potential issues during I140 stage.
Thanks
snhn
10-23 05:30 PM
no finger print notice either. But I have heard that take a couple of weeks after the EAD and AP approvals. Some of them got them before the AP approvals came. its weired how they work..
prince_charming
02-14 01:25 PM
Hey guys,
My MTR was approved almost 3 months ago and my attorney received the MTR approval notice.
The decision was that both mine and my wife's I-485's are reopened.
But its been almost 3 months and online status on USCIS website has not changed yet......
Does anyone noticed the same situtation with their MTR approval and no online status change?
- Prince
My MTR was approved almost 3 months ago and my attorney received the MTR approval notice.
The decision was that both mine and my wife's I-485's are reopened.
But its been almost 3 months and online status on USCIS website has not changed yet......
Does anyone noticed the same situtation with their MTR approval and no online status change?
- Prince
Tidak ada komentar:
Posting Komentar